Reolink TrackMix PoE review - A smart 4K PTZ security camera with two lenses, auto-tracking - CNX Software

2022-10-25 20:55:14 By : Mr. Mac Chang

CNX Software – Embedded Systems News

Reviews, tutorials and the latest news about embedded systems, IoT, open-source hardware, SBC's, microcontrollers, processors, and more Multiview Display

Reolink TrackMix PoE review - A smart 4K PTZ security camera with two lenses, auto-tracking - CNX Software

Reolink has launched another 4K PTZ smart security with human and vehicle detection, plus pet detection (Beta). The Reolink TrackMix PoE comes with two lenses, one with a wide-angle, and the other telephoto lens to zoom on a specific zone, and supports auto-tracking. I’ve had the camera for a few months so I’ll report on my experience with the device.

The camera is also compatible with Google Assistant for voice control.

The package is fairly larger and heavier than other Reolink cameras I have used, as the camera is larger.

The package comes with the camera itself with a cable with Ethernet and power (12V) and a mount for wall or ceiling mounting, a short Ethernet cable, a waterproof lid for the Ethernet cable, a screw set, a Quick Start Guide, a waterproof lid installation guide, a paper to help with the mounting, and a 24-hour surveillance sticker.

We can see the two lenses on the front of the camera along with the IR LEDs and spotlights.

The back of the camera is equipped with a speaker for the two-way audio function.

The MicroSD card socket can be found underneath. Make sure to install a MicroSD card before installation, unless you plan to connect the camera to an NVR (recommended).

There are two ways to mount the camera: to a wall (left) or a ceiling (right).

I added the camera to the Reolink app for Android in the same way I did for the other Reolink cameras I reviewed to make sure it worked properly before installation.

The most obvious difference is the presence of two video streams: one for the wide-angle camera (top), and the other for the telephoto camera (bottom). Pet detection is also a new feature so I enabled it.

Now that I had made sure the camera works fine, I mounted it to the wall. I just had to drill four holes and attach the camera with the provided screws. I had initially planned to power it with the 24V passive PoE injector from the MatchBox LoRaWAN gateway I own, but it did not work as Reolink TrackMix PoE camera only supports PoE injectors/switches that are 802.3af compliant (48V), and support active mode. So I used a separate 12V power adapter together with an Ethernet cable.

The PTZ (Pan Tilt Zoom) function is working well. We can control it manually or set a monitor point to which the camera will automatically go back after a user-specified time.

The ability to define presets is also convenient, but in the beginning, I had trouble with those not working well at all going all places. Calibrating the PTZ function solved the issue, and you should do it before using the PTZ function. Just tap on the Calibration button, and after a minute or so it’s done.

I demonstrate the PTZ presets in the video below.

I found it to work much smoother than on the Reolink Argus PT camera I reviewed in 2020, possibly due to WiFi lag, while the TrackMix camera relies on PoE.

The zoom level of the second camera can be adjusted from 1X to 6X as shown above, and we can capture a screenshot of both within the app.

If we use a microSD card for storage, video is recorded when motion is detected. If you want continuous recording you’ll need to connect the camera to an NVR. If PIR motion is enabled you’ll get many false positives, so you may want to set filters in the app to only show humans, vehicles or pets, or a combination of them. Pet detection is working (see the dog under the table?), but there are some false positives as my girlfriend or myself are sometimes detected as pets. I’ve downloaded the videos from the app and uploaded the samples to YouTube.

If you try to adjust the resolution on YouTube, you’ll find out only 480p is selectable. That’s because the downloaded videos are only of 896 x 512 resolution:

There’s apparently no option to download the “Clear” version of the video while in dual view in the app. Switching to single camera mode allows us to switch to “High” resolution and download the “Clear” version.

That’s not 4K, but 1080p60 for the telephoto lens. But if we download the video from the wide-angle camera with the same method, we do get a 4K video at about 10 fps:

I’ll upload a 4K sample a little later in the review.

Another highlight of the Reolink TrackMix PoE camera is the support for auto-tracking which can be found in the Detection Alarm section of the Reolink app together with other options such as Object Size, Sensitivity, and so on.

It’s possible to track people, vehicles, or even pets with three tracking methods:

You can see a demo of the latter in the videos below.

This is what it looks like from the phone when in portrait mode:

I did notice some artifacts when trying to play back videos from the MicroSD card, or even after downloading them to my phone.

I had just purchased three Samsung MicroSD cards specifically designed for video monitoring with claims of “high endurance” for up to 17,520 hours, or about two years,and I used one of them in the camera.

But I took the MicroSD card out of the camera to run badblocks programs on it from my Ubuntu laptop, and after a few hours, I could confirm some bad blocks were detected. So I changed to another of the Samsung Pro Endurance microSD cards I had just purchased, and the problem went away. I still have issues from time to time where recording for a given day can not be loaded. Note the camera will automatically delete old recordings as the microSD card fills up, and a 32GB card can keep about 3 days of recording in my location. I’d recommend a larger microSD card, or even better an NVR for higher capacity and more reliable storage, plus the ability to record continuously 24/7.

Finally, here’s a nighttime sample.

You’ll notice the camera record in black and white first using the IR lights, but upon motion detection, the spotlights are turned on, and the video switch to color mode.

If you’d rather not access the camera from the Reolink mobile app which requires an Internet connection, the Reolink TrackMix PoE comes with a web interface with the same features, but a revamped user interface compared to when we tested the feature in our review of Reolink RLC-810A camera.

You’ll still need the mobile for the first initialization. You’ll also need to remember the admin password set in the app when accessing the camera from its IP address.

Once logged into the interface we can access the stream,

control the PTZ function with up to three presets,

and playback videos recorded on the microSD card. What I could not do is visualize the streams from both lenses at the same time.

I also tried RTSP and ONVIF which worked in the RLC-810A, but the connection is refused as only HTTP and HTTPS ports are opened:

You can change that in the web interface by going to Network settings and enabling RTSP and/or ONVIF as needed.

We can see the new ports are opened:

You can play the 4K stream of the wide angle lens using RTSP with the following command:

The screenshot above looks fine, but I did have some severe artifacts from time to time.

You can play the lower resolution stream with:

If you want to stream the telephoto lens at Clear (4K) or Fluent resolution, you can use the command below instead:

ffplay rtsp://admin:[email protected]_ip:554/h264Preview_01_sub

You can see both Fluent streams played at the same time in the screenshot below.

I also tested ONVIF “successfully” with the free version of Onvifer app. PTZ works, but the app felt slow and I got some artifacts, and I could not change the profile since this required the PRO version of the app.

You can set a siren alarm when motion is detected. The default alarm is quite loud, and you can also set your own.

There’s also a two-way audio function, but the audio quality is quite poor with a lot of noise. It reminded me a bit about walkie-talkie quality, just worse. Adjusting the camera volume lower helped a bit, but it’s still often hard to understand the other person either on the phone or the camera side.

The Reolink TrackMix PoE camera has a pretty useful set of features with two lenses and auto-tracking support with the features working pretty well. I’ve had trouble with my microSD cards, either because I’ve been unlucky, or extra performance is required to record or watch two videos, one for each lens, at the same time. I would always recommend using an NVR for improved reliability and 24/7 video capture. I also appreciate the inclusion of spotlights enabling relatively clear night recordings when motion is detected. The alarm is loud and clear, but I can’t say the same for the two-way audio function which was close to unusable in my case. Having said that I still like the camera and will keep on using it.

I’d like to thank Reolink for sending the TrackMix PoE smart security camera for review. It can be purchased for $169.99 on Reolink’s store.

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

Support CNX Software! Donate via cryptocurrencies or become a Patron on Patreon

I see no mention of how well, if at all, this thing works without Internet-connection, like e.g. can the Android-app still be used and if it can, what features don’t work, if the camera has network-connection, but Internet-access has been blocked.

Personally, I refuse to buy IoT-devices that can’t be used without Internet-access, unless I can modify/replace the firmware to bypass such requirements.

Sorry I did not test that one. If you’re going to use the Android app, you’ll need Internet.

But it’s also possible to access the camera through it’s web interface, RTP streaming and ONVIF, like I did for the Reolink RLC-810A: https://www.cnx-software.com/2020/11/23/reolink-rlc-810a-review-a-4k-security-camera-with-people-vehicle-detection/#accessing-reolink-rlc-810a-camera-through-a-web-browser

I’ll add a few screenshots soon.

A ‘security’ device without open source firmware and client application is an INsecurity device.

Quite, indeed. Most budget-friendly IP-cameras are based on the Xmeye SDK and it has built-in backdoors by default, including a P2P-network for being able to connect through some NAT-networks and such.

I have several different ones myself and I’ve gone to the effort of modifying the firmware, but at least for the ones I have, blocking all to/from WAN for these devices is sufficient to block all the shenanigans, though with newer firmware they might have come up with new tricks.

I don’t trust most camera firmware, either. For the cameras I have, I configure them for a static IP address and give them an invalid gateway address. No internet for you!

It looks great, but you can’t buy it!

I’ve been trying to purchase it for months. But when you try to add it to your cart (yes, I tried the link in this review) it only gives you an option to be notified when it is in stock. I guess it’s never in stock because Reolink keeps giving all of their inventory to reviewers so that people can get excited about a product they can’t have.

For reference, I received the camera in July, but the company first told me to wait for the end of August or September before publishing the review, and then September/October. This week, they asked me an update about the review, so I published it, and I’d expect the camera to be available very soon.

Thank you for testing it with the Onvifer app. I’ve been using that app for years and paid for the pro version. It was completely worth it as the developer is *very* responsive to users. They’ve fixed three bugs for me so far and altered the way a new feature worked because it didn’t work well for me. I wonder if they have a donate option as I feel I’m getting more than I paid for!

Reolink TrackMix PoE review - A smart 4K PTZ security camera with two lenses, auto-tracking - CNX Software

10 Inch Hdmi Monitor Change Ad Consent Do not sell my data